Turris Omnia and Home Assistant in LXC Container
Turris Omnia hosting Homeassistant in LXC Container
In the Turris Omnia I have installed the AEOTEC ZWave Dongle, in the front USB port.
This is largely inspired by [1] and [2] and all credits belog to the author.
Assume we have the containers stored in /srv/lxc and the container is called homeassistant.
Install the kernel module
# opkg update && opkg install kmod-usb-acm
or
# opkg update && opkg install kmod-usb-uhci
Now I don't remember :(
Expose the USB to the LXC container
Edit the /srv/lxc/homeassistant/config file and put there:
# Give an access to the USB with the Aeotec dongle
lxc.mount.entry = /dev/bus/usb dev/bus/usb none bind,optional,create=dir 0 0
lxc.mount.entry = /dev/ttyACM0 dev/ttyACM0 none bind,optional,create=file 0 0
lxc.mount.entry = /dev/bus/usb dev/bus/usb none bind,optional,create=dir 0 0
lxc.mount.entry = /dev/ttyACM0 dev/ttyACM0 none bind,optional,create=file 0 0
Setup the host system to expose the ttyACM0 device
Modify the device permission access using the hotplug system. Just create the following script:
# cat /etc/hotplug.d/usb/10-zwave
ZWAVE_PRODID="658/200/0"
SYMLINK="zwave"
if [ "${PRODUCT}" = "${ZWAVE_PRODID}" ]; then
if [ "${ACTION}" = "add" ]; then
DEVICE_NAME=$(find /sys/${DEVPATH}/tty/ -name ttyACM* | grep -Eo "ttyACM.*$")
if [ -z ${DEVICE_NAME} ]; then
logger -t hotplug "20-zwave: Info: no tty device created - exiting"
exit
fi
logger -t hotplug "20-zwave: determined ${DEVICE_NAME} as device name for Aeotec Z-Stick "
/bin/chown root:plugdev /dev/${DEVICE_NAME}
/bin/chmod 664 /dev/${DEVICE_NAME}
logger -t hotplug "20-zwave: Changed access rights for /dev/${DEVICE_NAME}"
ln -s /dev/${DEVICE_NAME} /dev/${SYMLINK}
logger -t hotplug "20-zwave: Symlink /dev/${SYMLINK} -> /dev/${DEVICE_NAME} created"
fi
if [ "${ACTION}" = "remove" ]; then
rm /dev/${SYMLINK}
logger -t hotplug "20-zwave: Symlink /dev/${SYMLINK} removed"
fi
fi
EOF
Make sure that the plugdev group is added
# groupadd -g 46 plugdev
# groupadd -g 46 plugdev
Now after plugging the Zwave dongle back, you should see
# ls -l /dev/ttyACM0
crw-rw-r-- 1 root plugdev 166, 0 Oct 28 00:24 /dev/ttyACM0
[1] https://klein-gedruckt.de/2016/12/turris-omnia-arduino-nano-usb/
[2] https://klein-gedruckt.de/2016/12/turris-omnia-zwave-install/
[2] https://klein-gedruckt.de/2016/12/turris-omnia-zwave-install/
Comments
Post a Comment